Remaplast

Products

Technical plastics

Packaging materials

Rubber products

Other products

PP equipment

Technical plastics

Zobraziť viac

PA 6

Details

pa6

This material represents an optimal combination of mechanical strength, stiffness, damping ability and wear resistance. The mentioned properties, together with favorable electrical insulation properties and good resistance to the action of chemicals, place PA 6 in the group of materials universally applicable in the field of construction and maintenance.

Colour variations:

  • natur
  • black

Bars, plates and tubes are available.

Usage:

  • Gears
  • Bearings and bearing housings
  • Pulleys
  • Wheels
  • Structural elements of machines requiring higher resistance

Additional information:

  • Resistance to material fatigue
  • High shock absorbing ability
  • High moisture absorption compared to other polyamides
  • High hardness and strength
  • Chip machinability

PA 66

Details

pa66

A material with higher mechanical strength, stiffness and resistance to temperature and wear than PA6. It also has better creep resistance, but its impact strength and mechanical damping capabilities are somewhat reduced. It is suitable for machining on automatic lathes.

Colour variations:

  • natur
  • black

Bars, plates and tubes are available.

Usage:

  • Casings
  • Pulleys
  • Parts of machines where higher abrasion resistance is required

Additional information:

  • Resistance to material fatigue
  • High shock absorbing ability
  • High hardness and strength

POM - C

Details

POM-c

The material is pure acetal copolymer. POM-C is more resistant to hydrolysis, the action of strong bases and heat-oxidative degradation than POM-H. It is characterized by lower thermal expansion and also has better resistance to abrasion. POM-C is machined very well on mechanical lathes and is very suitable for the production of precision mechanical parts.

Colour variations:

  • natur
  • black

Bars, plates and tubes are available.

Usage:

  • Precise and dimensionally stable structural elements
  • Parts of food machinery and conveyors
  • Casings, pockets
  • Sliding elements in a humid environment
  • Electro-insulating elements

Additional information:

  • Quality construction material
  • Higher strength, stiffness and dimensional stability
  • Good machinability
  • Almost zero absorbency in water
  • Suitable for contact with food (natur colour var.)

POM - H

Details

POM-h

POM-H acetal – homopolymér ma o trochu vyššiu tvrdosť, mechanickú pevnosť a odolnosť voči tečeniu ako materiál POM-C. Naproti tomu má nižšiu chemickú odolnosť a horšiu obrobiteľnost v porovnaní s POM-C.

Colour variations:

  • white

Bars and plates are available.

Usage:

  • Food industry
  • Electrotechnical industry
  • Automobile industry
  • Engineering industry

Additional information:

  • Firmness
  • Dimensional stability
  • Dobrá odolnosť proti tečeniu
  • Tenacity
  • Almost zero absorbency in a humid environment and in water
  • Good electrical insulation properties

PP

Details

PP

Simple construction material with good chemical resistance, easy to weld and shape. It is mainly used in the production of various welded tanks, reservoirs and apparatus in the chemical industry, in the construction industry. In the white version, it is also suitable for direct contact with food.

Colour variations:

  • natur
  • grey

Bars, plates and tubes are available.

Usage:

  • Welded tanks, containers, reservoirs in a chemical environment
  • Underground reservoirs for liquid substances
  • Structural parts for chemically aggressive environments
  • Machine casings

Additional information:

  • Fairly good hardness
  • Formability, bendability
  • Easy weldability
  • Good chemical resistance

PVC

Details

PVC

The PVC material is a relatively hard thermoplastic characterized by high resistance to aggressive chemical environments. It is very weldable and can be shaped while hot. Its disadvantage is a relatively small temperature range of use and high fragility at low temperatures.

Colour variations:

  • grey
  • black

Bars, plates and tubes are available.

Usage:

  • Parts of pumps and fittings
  • Flanges
  • Tanks and various containers in the chemical industry
  • Chemically resistant machine parts for lower mechanical loads

Additional information:

  • Good chemical resistance
  • Relatively high strength and stiffness
  • Well machinable
  • Hardly flammable

PE

Details

PE

Structural sliding material with high resistance to abrasion and wear. It has high impact and notch toughness without fracture and a low coefficient of friction. It is hygienically harmless (applies only to some colors) and has a low density - it is lighter than water. It also stands out for its high chemical resistance.

Colour variations:

  • natur
  • green
  • blue
  • black

Bars and plates are available.

Usage:

  • Chain guards
  • Guides of conveyor belts and belts
  • Unloading hoppers and chutes
  • Sliding and guiding parts of food machinery
  • Self-lubricating sliding bushings and rails

Additional information:

  • High gliding
  • Low moisture absorption
  • Excellent dimensional stability
  • Impact strength and bending strength
  • Good electrical insulation properties

PTFE

Details

PTFE

Polytetrafluoroethylene, known as Teflon. Polymer with very high temperature resistance (up to – 200 °C and + 260 °C) with excellent dielectric properties, high resistance to aging, with almost zero water absorption, with good sliding properties. Chemical resistance is characteristic, as PTFE resists acids, bases, salts and solvents even at elevated temperatures.

Colour variations:

  • white

Bars and plates are available.

Usage:

  • In the food industry as machine parts
  • In the chemical and textile industry
  • Medical and pharmaceutical equipment
  • Flat seals
  • Insulators
  • Sliding sleeves and rails

Additional information:

  • High notch toughness
  • Excellent chemical resistance
  • Low coefficient of friction
  • Good electrical insulation properties
  • Low resistance of the material to sliding and abrasive wear

ABS

Details

ABS

ABS – Acrylonitrile butadiene styrene. ABS boards are characterized by high toughness and hardness. They are suitable for further heat treatment by vacuum forming and the moldings have good shape stability. The boards can be used as coverings for ceilings, walls, interiors, for advertising purposes - printing is possible.

Colour variations:

  • white
  • black

Plates are available.

Usage:

  • Automobile industry
  • Sport
  • Machine casings
  • Production of advertising stands and boards
  • Transport pallets

Additional information:

  • High optical quality
  • Smooth or raster surface
  • Good heat resistance
  • Chemical resistance
  • Very workable
  • The boards are hard, scratch-resistant

TEXTIT

Details

TEXTIT

Construction and electrical insulation material – cotton fabric as reinforcement and phenolic resin as binder. The material has excellent mechanical and electrical insulation properties, good machinability and resistance to water, oils, petrol and weak acids. Suitable material for parts subjected to high pressure.

Colour variations:

  • brown

Bars, plates and tubes are available.

Usage:

  • Gears
  • Pulleys
  • Machine parts and classification
  • Cabinets of substations and switchboards
  • Insulation boards
  • Lining of the sliding parts of the presses

Additional information:

  • Production of sliding bearings
  • Production of larger gears
  • Pulleys
  • Damping parts
  • Protective discs
  • Pads

PMMA

Details

PMMA

Polymethyl methacrylate (PMMA), commonly known as plexiglass, is a transparent synthetic polymer with thermoplastic properties. Plexiglas is fragile, hard, permanent and strong. It is resistant to scratches and can be polished well. It shows good resistance to UV radiation and temperature changes. Use is in the temperature range of -40 °C to +90 °C.

Colour variations:

  • transparent
  • opal (milky)
  • matte

Bars, plates and tubes are available.

Usage:

  • Machine casings
  • Advertising industry
  • Transparent applications

Additional information:

  • Excellent optical properties
  • Color fastness
  • High quality surface
  • Excellent light transmission
  • Very good resistance
  • Formability, bendability

PC

Details

PC

Polycarbonate is a material with excellent construction properties such as strength and temperature range for short-term and long-term use. The material is translucent, transparent with a light transmission of 88%.

Colour variations:

  • transparent
  • opal

Plates are available.

Usage:

  • Particularly loaded bearings, bushings, washers
  • Dimensionally fixed parts for slideways, gears, cylinders, pump components
  • Insulating electrotechnical components
  • Components in the food industry and packaging lines
  • Protective shields
  • Visors, windows
  • Protective panels

Additional information:

  • High impact resistance
  • High impact resistance
  • High resistance to bending induced fracture
  • Conditionally bendable when cold and hot

Packaging materials

Zobraziť viac

PVC thermoformed foils

food / pharmaceutical quality

 

– Mono

– Duplex

– Triplex

Zobraziť viac

PET thermoformed foils

food / pharmaceutical quality

– PET
– A PET (Virgin/Recycled)
– R PET
– ABA PET
– PET + PE
– PET + PE / + EVOH

Zobraziť viac

PS/PP/PLA thermoformed foils

food / pharmaceutical / manufacturing quality

– PS, PS / PE, PS / EVOH / PE
– PP, PP / EVOH
– PLA

Zobraziť viac

Technické gumy

Zobraziť viac

Polyurethane

Polyurethane plates

  • Hardness 35 – 95° Shore A
  • Dimension 2000/1000mm
  • Dimension 3000/1000mm

Polyurethane rods

  • Hardness 35 – 95° Shore A
  • Length 1000mm
  • Diameter od 10mm do 100mm

Parts / Finished products

We are able to prepare the finished product based on the drawing documentation.

Rubber sheeting

General use

Rubber sheeting in basic design, quality and economical alternative. Designed for use without special requirements for resistance to negative environmental influences. Made on the basis of SBR in several properties and colours.

Abrasion-resistant quality

Sealing plate for mechanical stress, made on the basis of a combination of NR, SBR and BR rubbers. This gives the material resistance to abrasion (worth 120 mm3) and at the same time an exceptionally high tensile strength (worth 17 MPa).

Oil-resistant design

Rubber sheeting with special properties suitable for the environment in which it comes into contact with mineral oils (NBR45 series) and gasoline, resp. isooctanes (higher NBR72 series). Made of NBR-SBR synthetic compound.

Heat-resistant design

Heat-resistant rubber sheeting suitable for outdoor use. Resistant to high temperatures, weathering, ultraviolet radiation, acids and alkalis. Made on the basis of EPDM with various physico-mechanical properties.

Food grade

Our food rubber grade is available in white colour and is based on EPDM. It meets the requirements of the article 3 of Regulation (EC) No. 1935/2004 of the European Parliament and of the Council on materials and articles intended to come into contact with food..

Paraguma

A highly strong and highly elastic sheeting. Being based on natural rubber it provides also an enhanced wear resistance. We produce two PARA grades, one of them having a density under 1 g/cm3 which means it is lighter than water.

Silicone rubbers

The temperature-resistant material, which has excellent mechanical properties, is available in many colour variants, hardnesses and, in most cases, is also suitable for food purposes. Silicone compact plates are intended for the production of gaskets as well as for lamination in, for example, the woodworking industry.

Sound insulation quality

Special self-extinguishing material based on CR and NR rubbers with acoustic properties acting as a sound barrier. Designed for use without further demands on resistance to negative environmental influences and without mechanical stress.

Mikroporézne gumy

Sheets on the base
NBR

  • black

 

Sheets on the base
CR

  • black

 

Strips / profiles on the base NBR

  • black
  • self-adhesive
  • non-adhesive

Sheets on the base
PE / EVA

  • coloured

 

Electrical insulating matting

Class 0

Working voltage: 1000 V
Proof voltage: 5000 V
Withstand voltage: 10,000 V

Class 2

Working voltage: 17 000 V
Proof voltage: 20 000 V
Withstand voltage: 30 000 V

Class 3

Working voltage: 26 500 V
Proof voltage: 30 000 V
Withstand voltage: 40 000 V

Class 4

Working voltage: 36 000 V
Proof voltage: 40 000 V
Withstand voltage: 50 000 V

Rubber flooring

General use

Floring for non-aggressive interior environments. The hardness of the standard version is 80 Shore, which means high dimensional and dimensional stability and resistance to mechanical damage. Made of SBR and NR rubbers.

Oil-resistant design

Flooring for indoor environments, in which the floor regularly comes into contact with mineral oils (NBR45 series) and gasoline, resp. isooctanes (higher NBR72 series). Made of NBR synthetic rubbers.

Heat-resistant design

Interior and exterior flooring, resistant to high temperatures, weathering, UV radiation, acid and alkalis. In hardness 80 Sh A (EPDM96 series), 70 Sh A (EPDM95 series) and 60 Sh A (EPDM15 series). Made of synthetic EPDM rubbers.

Flame retardant

Tile in the classic money pattern S-8. Suitable for environments where there is a higher risk of fire. According to the EN13501 standard, it is classified as a non-flammable building material in class Cfl-s1.

Other products

Ongrofoam

Lightweight PVC

  • white, coloured
  • for advertising purposes  

 

Akylux

Hollow polypropylene

  • boards
  • pads, underlay

 

Hoses

  • Alufelx
  • Silicone
  • Pressure
  • Garden, for water, gas, ..

Tubes

  • plastic

 

 

Personal protective equipment

Respirators

FFP2, FFP3

Gloves

nitrile, vinyl

Suits

type 5/6, 3/4

Ag tests

spitting, swabbing

Company founded in 1992

Contact us

In case of any questions, contact us by email: stredisko-ba@remaplast.sk, info@remaplast.sk

or call us on the phone number:

+421 905 603 148

+421 915 735 057

+421 3 15 50 16 66